Gripper geometry is product-specific
Fingers, pads and nests must follow the part outline. Machining every iteration slows cell commissioning.
Industries
Application-specific parts for robotics and machine vision
Robot cells and vision systems need mounts, fingers and routing that match the product and camera geometry — not generic catalogue hardware. Layer Works supports those awkward, low-volume polymer parts with CAD and FDM manufacture.
Discuss a robotics or vision partCommon problems we see
Camera and sensor alignment is critical
Vision mounts need repeatable position, cable clearance and access for adjustment without redesigning the whole frame.
Cables and pneumatics fight the payload
Routing around axes and EOAT packages needs compact, custom clips and guides that catalogue parts rarely match.
EOAT weight and stiffness trade off
Printed components can reduce mass versus metal for many light-to-moderate duty applications when orientation and material are reviewed.
Example components
- Gripper fingers, pads and mounting blocks
- Vacuum end-effector interfaces
- Camera and optical sensor mounts
- Cable and pneumatic routing on EOAT
- Alignment and calibration fixtures
- Protective covers and light shields
Why low-volume FDM is relevant
- EOAT and vision hardware often iterate during integration
- Batch sizes are small and geometry is unique to the SKU
- Weight and packaging constraints favour tailored polymer parts
- Bridge solutions keep projects moving before metal production
Where Layer Works adds engineering value
- Design around cable exit, bolt access and clearances
- Material selection for stiffness versus compliance
- Orientation advice for layer strength on load paths
- Fast revision loops after live testing
Relevant materials
Representative applications
Examples of the types of problems we support — not customer case studies unless stated otherwise.
Robotic vacuum gripper mounts
EOAT mounting and hose routes needed to match a specific sheet-metal gripper package.
Industrial sensor bracket
Standard extrusion brackets did not place the sensor at the required height, angle or cable exit.
Sensor mount with cable management
Sensor position and cable routing needed to share one tidy package beside moving equipment.
Linear rail actuator bracket
The actuator needed a stiff bridge across rails with hose clearance that a catalogue bracket could not provide.
Discuss a robotics or vision part
Send CAD, a sketch or a short description of the problem.